"Good to go" for any DIY IOT project, qBody Arduino MKR Compatible Interface Board Kit is the part of the newest Interface Board Kits line designed to help hobbyists, makers and all DIYers to build IOT POCs and making HW prototyping easily:
IOT device peripheral integrated : External power DC/DC, temperature and motion sensors, Real-Time Clock IC , Serial Flash, GPIOs, RS485 and 1-Wire schematic;
Unique interface switching system : All external interfaces and most of IOT GPIOs could be easily switched to bring functionality required;
Rich set of interface options : Four terminal blocks, Grove I2C and 4-pin JST I2C&Power, qJam and low profile 0.1" Arduino MKR Compatible interface connectors and RTC holder;
Some room for prototyping : Proto holes grid across whole PCB space for DIP components installation and wiring;
Environmental ready : Developed to be perfectly fit and mounted inside qBox Collection Enclosures for indoor and outdoor DIY IOT projects.
Each qBody Arduino MKR Compatible PCB kit consists of high-quality double sided PCB with electronic components and set of connectors installed and 3,5mm terminal plugs.
PCB has enough space to keep one Arduino MKR Compatible (AMC) IOT board, power supply (DC/DC), OLED display and sensor modules, as example, using plain grid proto holes.
There are four pluggable 3,5mm terminal blocks to be used for external power or/and GPIO lines. Board has several options for I2C connection : one qJam, one Grove I2C and one 4-pin JST (I2C&Power) connectors populated on PCB. And still several DIP 0.1" I2C / SPI interface connectors could be placed at PCB.
PCB could be easily placed inside IP65 waterproof qBox enclosure : just remove by plier PCB corners, mount PCB inside an enclosure and secure it by two 3,5mm self-tapping screws.
The PCB of qBody Arduino MKR Compatible (AMC) PCB Kit is used as the same PCB module as used for qBox BoD Enclosure Kits.
Using qBody Arduino MKR Compatible (AMC) PCB kit the variety of DIY IOT prototyping and POC projects could be done.
- qBody Arduino MKR Compatible Interface Board;
- Four terminal block plugs.
Schematic: qBody Arduino MKR Compatible Interface Board Kit schematic.
- IoTBotsCom_qBox : Arduino Compatible IOT FrameWork to be run on Arduino MKR Compatible and Adadfruit Feather Compatible IOT boards;
- IoTBotsCom_qFWK : Demo Library to play with qBody, qBot, qBodyMini, qBotMini IOT-BOTS.COM Arduino MKR Compatible and Adadfruit Feather Compatible Interface boards.
More info: Coming soon...